Scored: Red Lines Connect French Masonry Practices to Colorado
Color can transform a utilitarian building into an architectural statement.
The building's red mortar joints (joints rouges) are scored into a stucco coating and do not
actually hold blocks of limestone together…incised and painted lines were used
for architectural effect. One of the
most intriguing possibilities in exploring the exterior of this hotel is the
implication of brick-red “mortar joints” against chamois-yellow stucco. This
detail connects an aspect of historic French building traditions to Hotel de
Paris: the aesthetic treatment of masonry.
Pigment: The Use of Iron Oxide
In France, masons
working with mortar could introduce color into their mixtures. Among the
materials available were naturally occurring iron oxide pigments (ochre rouge) and finely
ground ceramic materials, including crushed brick and terracotta. For purposes of analysis, iron oxide paint
will be the focus of this article.
Iron oxide is one of the oldest and
most widely used mineral pigments in architectural history. Naturally occurring
iron-rich earths, including red ochres, produce colors ranging from pale-pink
or muted salmon, warm terracotta, reddish orange, deep brick red, to muted
reddish brown. When incorporated into a
lime wash or masonry paint, these pigments could create an appealing contrast
with light-colored masonry. This
approach offers advantages:
- Visual definition: Red or pinkish joints emphasize
individual masonry blocks and establish a regular geometric pattern across
broad, plain façades.
- Architectural character: The contrast between pale blocks
and warm-colored joints provide a distinctive appearance.
For a building such as Hotel de Paris, the red-pigmented wash or paint represents a deliberate design decision rather than an incidental consequence of construction.
![]() |
| Rush to the Rockies exterior paint. Applied in 1958. |
Traditions: Tuileau and Chamotte
French building traditions include the use of crushed brick dust (tuileau), a material produced by crushing fired roof tiles, bricks, and other terracotta products. The related term chamotte refers to fired clay or ceramic material that has been crushed or ground into a granular form for reuse in certain traditional building materials.
French building
literature describes the preparation of cementitious material from pulverized
roof tiles and other fired-clay products. An early nineteenth-century French
building treatise, referencing the work of architect and theorist Jean-Baptiste
Rondelet, specifically discusses using crushed tiles with lime to produce red
mortar.
Although a masonry
building in a mountainous environment contends with precipitation (rain, snow,
and ice), seasonal temperature changes, and repeated freeze-thaw cycles, the
only benefit of the red lines on Hotel de Paris is one of decoration and the
suggestion of solidity and permanence.
When used between
pale limestone or yellow-colored masonry blocks, the resulting joints can
create a striking visual contrast. Rather
than allowing the masonry to appear as a continuous, uninterrupted surface, the joints establish a deliberate pattern. Each individual block
becomes visually distinct.
The primary purpose
of a red iron oxide limewash or paint on the façade of Hotel de Paris is
coloring. The material would have been a
naturally occurring mineral pigment red, rust, ochre, or reddish brown in
color. The effect was primarily
aesthetic and decorative to create an architectural effect.
Lines: An architectural decision
What makes this
subject especially compelling is the possibility that the color of the mortar
was as intentional as the selection of the yellow stucco coating itself. Faux stones provide the dominant
surface color, while the incised lines create a pattern that gives the building
its distinctive character. The effect changes throughout the day as sunlight
strikes the masonry from different angles. In softer light, the reddish joints
may appear subdued; under direct sunlight, they can become much more
pronounced. Slight shadows provide depth
and dimension.
This is an important consideration when examining nineteenth-century French architecture. The appearance of a building was not necessarily determined by its stone alone. Mortar, pointing techniques, joint profiles, and surface treatments (lime wash or masonry paint) all contributed to the finished architectural composition.
![]() |
| Hotel de Paris, 2010 |
Craftmanship: French Building Traditions
There is something
particularly appealing about the possibility that a minor construction detail
might reveal a connection between France and Colorado.
The use of crushed
terracotta in lime mortar represents an intersection of craftsmanship, material
science, and architectural aesthetics. It demonstrates that historic builders
understood how to manipulate locally available materials to achieve both functional
and visual objectives.
For Louis Dupuy, these
traditions may have been familiar; however, we should not assume that Hotel de
Paris deliberately replicated a particular Parisian building. The possibility, however, deserves investigation.
Whatever the
eventual findings, examining the wash or paint offers an opportunity to look
beyond the façade and investigate materials, techniques, and cultural
influences that contributed to the creation of Hotel de Paris.
![]() |
| Stucco fragment and current exterior |
Preservation: Looking Beneath the Surface
In anticipation of “Rush
to the Rockies” (a statewide centennial celebration marking 100 years since the
Colorado Gold Rush), the exterior of Hotel de Paris Museum was painted in 1958. The Clear Creek Mining Journal reported,
“It was the plan…to instigate improvements of the major buildings along Alpine Street (now 6th Street), including the famous Hotel de Paris…” About forty years later, the current exterior
coating on Hotel de Paris was installed.
In the future, an architectural conservator or materials specialist
could collect small samples from protected, representative locations and
undertake:
- Petrographic analysis: Identifying mineral
constituents, aggregate, and ceramic inclusions.
- Microscopic examination: Determining whether the reddish
coloration comes from pigment, crushed brick, or naturally occurring
minerals.
- Color analysis: Establishing the original wash
or paint color from protected areas or collected fragments rather than
relying exclusively on weathered or replaced exterior surfaces.
Findings could help
establish an appropriate preservation approach when coating replacement or repainting
becomes necessary.




